Sokkia 30R Series Operator's Manual page 86

17. OFFSET MEASUREMENT
2. Sight the offset point and press
[DIST] in the first page of the
Meas mode screen to begin
measurement.
The measurement results are
displayed. Press [STOP] to stop
the measurement.
3. Press [OFFSET] in page three of
Meas mode to display <Offset>.
4. Enter the instrument station data.
"12.1 Entering Instrument
Station Data, PROCEDURE
Reading in Registered
Coordinate Data".
5. Select "Offset/Dist" and press
[EDIT].
Input the following items.
(1) Horizontal distance from the
target point to the offset point.
(2) Direction of the offset point.
• Direction of offset point
← : On the left of the target point.
→ : On the right of the target
point.
↓ : Closer than the target point.
↑ : Beyond the target point.
• Press [OBS] to re-observe the
offset point.
6. Press [OK] on the screen of step
5 to calculate and display the
distance and angle of the target
point.
78
Offset
Stn. Orientation
Offset/Dist
Offset/Angle
Offset/2D
2 . 0 0 0
OBS
=
EDIT OK