Sokkia 30R Series Operator's Manual page 68

14. SETTING-OUT MEASUREMENT
PROCEDURE
1. Press [S-O] in the third page of
the Meas mode screen to display
<S-O>.
2. Enter the instrument station data.
"12.1 Entering Instrument
Station Data, PROCEDURE
Reading in Registered
Coordinate Data".
3. Set the azimuth angle of the
backsight point.
"12.2 Azimuth Angle Setting"
steps 2 to 6
4. Select "S-O data."
5. Press [ S-O] to select distance
input mode.
Each time [ S-O] is pressed: S-O
S (slope distance) , S-O H
(horizontal distance), S-O V
(height difference), S-O Coord
(coordinates), S-O Ht. (REM
measurement).
"14.2 Coordinates Setting-out
Measurement", "14.3 REM
Setting-out Measurement"
• When [READ] is pressed,
registered coordinates can be
recalled and used. Distance and
angle are calculated using the
coordinate value.
"12.1 Entering Instrument
Station Data, PROCEDURE
Reading in Registered
Coordinate Data"
60
S-O
Stn. Orientation
S-O data
Observation
EDM
S
S d i s t :
H a n g :
READ
0 . 0 0 0 m
E D I T
O K