Outputting Job Data - Sokkia 30R Series Operator's Manual

23. OUTPUTTING JOB DATA

It is possible to output JOB data to a host computer or printer.
Communication cables: "27.2 Optional Accessories"
Output format and command operations: "Interfacing with the SOKKIA SDR
Electronic Field Book" and "Command Explanations" manuals.
• Measurement results, instrument station data, known point data, notes, and
coordinate data in the JOB is output.
• Known point data entered from an external instrument is not output.
• Communication setup can be performed in the JOB menu as well. Select
"Comms Setup" in <JOB>.
• When "inch" is selected as the distance unit, data is output in "feet."
PROCEDURE Outputting JOB data to host computer
1. Connect SET and host computer.
2. Select "JOB" in Memory Mode.
3. Select "Comms output" to display
the JOB list.
4. Select the JOB to be output and
press { }.
"Out" appears to the right of the
JOB selected. You can select as
many JOBs as you want.
• "*" means the JOB has not been
output to an external device yet.
5. Press [OK].
Memory
JOB
Known data
Code
JOB
JOB selection
JOB name edit
JOB deletion
Comms output
Comms setup
111