Changing Password - Sokkia 30R Series Operator's Manual

3. Select "Registration."
Select either "User 1" or "User 2"
as the softkey array to be
registered.
4. Press { }. The softkey array is
registered as user 1 or user 2 and
<Key function> is restored.
PROCEDURE Recalling an allocation
1. Select "Key function" in Config
Mode.
2. Select "Recall." Select the key
array for either User 1, User 2, or
Default (setting when the SET was
shipped), and press {
<Key function> is restored. This
displays the functions in the
recalled array in Meas mode.
24.3

Changing Password

Set password can be changed.
• No password was set when the SET was shipped.
PROCEDURE Changing password
1. Select "Change Password" in
Config mode.
2. Input old password and press
{ }.
24. CHANGING THE SETTINGS
}.
C ha ng e p as s wo r d
O ld p as s w o r d
123