Sr8800-X/Cr16000-F Leds - H3C SR8800-X Quick Start Manual

SR8800-X/CR16000-F LEDs

Table 2 Descriptions for SR8800-X/CR16000-F LEDs indicating a normal state
Card
MPU
Switching
fabric
module
Service
module
LED LED status
On
CF card status LED
(CFS)
Flashing
OK: On
Fan tray status LED
FAIL: OFF
(FAN)
OK/FAIL: Green
OK: On
FAIL: OFF
Power status LED
(PWR)
OK/FAIL: Green
RUN: Flashing (once per two
seconds)
ALM: Off
RUN: Fast flashing (four times
per second)
ALM: On
Card status LED
RUN: On
(SLOT)
ALM: On
RUN/ALM: Flashing green
RUN/ALM: Fast flashing green
(four times per second)
RUN/ALM: Steady red
On
MPU status LED
(ACT)
Off
RUN: Flashing (once per two
seconds)
RUN: Fast flashing (eight
times per second)
Switching fabric
RUN: Flashing (once per two
module LED
seconds)
ALM: Off
RUN: On
ALM: Off
RUN: Slow flashing green
(once per second)
Service module
LED
RUN: Fast flashing green
(eight times per second)
OAA module LED ALM: Off
Description
The CF card is present and idle. Do not
hot swap it.
The CF card is performing read/write
operations. Do not hot swap it.
All fan trays are operating correctly.
All fan trays are operating correctly.
All power supplies are operating
correctly.
All power supplies are operating
correctly.
The card is operating correctly.
The card is loading software.
The card might be starting up.
The card is operating correctly.
The service module is loading
software.
The card might be starting up.
The MPU is operating in active mode.
The MPU might be operating in
standby mode.
The switching fabric module is
operating correctly.
The switching fabric module is starting
up.
The switching fabric module is
operating correctly.
The switching fabric module is starting
up.
The card is operating correctly.
The card is starting up. If the LED
keeps fast flashing green, the card fails
registration.
The system is operating correctly.
4