Checking Installed Software Versions - Philips CARDIOMD Service Manual

Checking Installed Software Versions

7.4 Checking Installed Software Versions

When you have completed a software update, you can check the system log files to verify that the
software on the CardioMD software installation CD you have been using has actually been in-
stalled on the system.
Procedure
To check the version of the acquisition soft-
ware (GUI – Graphical User Interface):
1. Check the version number in the upper
left-hand corner of the CardioMD applica-
tion window and compare it to the GUI
version number indicated on the label of
the installation CD-ROM and the release
note.
2. Open the Windows Explorer.
3. In the directory
C:\cardiocam\SystemLog
most recent log file.
4. Double-click the name of the log file to
open it in the Windows Notepad program.
The contents of the log file will look similar to
the file shown on the right.
5. Check the EDC software against the EDC
software version indicated on the label of
the installation CD-ROM.
Look for the entry
EDC board microcontroller software ver-
sion. You can safely ignore the entry
.
S/W
6. Check the motion controller software
(item ) against the MC software
MC S/W
version indicated on the label of the instal-
lation CD-ROM.
Note. Both EDC boards must have the same software version. Likewise, both motion controllers
must have the same software version.
7-24 CardioMD Service Manual
, find the
– this is the
MC S/W
DSP
Details
EDC software version
MC software version
1MAN0158-H11 04-2005 CSIP Level 1