Thermo Scientific 2210AM Manual page 40

Terms
Stability Criteria
Post Wash Event
Post Wash Cycle Source
Post Wash Cycle Volume
Post Wash Cycle Stir Time
CLEANER PARAMETERS
Cleaner Source
Volume to add
Clean Flow Rate
Stir Time
Frequency
Start Day/Date
Start Time
TEMPERATURE UNITS
Units
METHOD PARAMETERS
Cell Wash Volume
Reaction Temperature
Control
Reaction Temperature
Wavelength
Blank Measurement
Orion 2210AM Ammonia Analyzer
Description
Defines the stability level of the data
before accepting it. The stability criteria is
a measure of stability of the absorbance
level rate of 0.001 AU per sec as specified
by the number 1 through 10.
Washing the cell after completion of the
event selected with the following source,
volume and stir time.
Fluid for post washing the reaction cell.
The amount of fluid pumped for post
washing.
The amount of time the fluid is stirred for
post washing the cell.
Fluid for cleaning the cell.
The amount pumped for cleaning.
The rate at which the cleaner source is
pumped to clean the cell.
The amount of time the fluid is stirred for
cleaning the cell.
The time duration between two cleaning
cycles.
For weekly cleaning the day of cleaning.
For monthly cleaning the date of cleaning.
The time to start the cleaning on the day
or date selected.
Units of temperature.
The amount of sample pumped to wash
the cell.
PID temperature control.
The temperature set point.
The LED wavelength.
Allows the blank measurement in the
analysis cycle.
Possible Values, Options
1 through 10.
Analysis, Calibration, Validation, Not
Assigned.
Sample, Reagent, Cleaner, Standard
-99.9 to +99.9 mL
0 to 999 seconds
Sample, Reagent, Cleaner, Standard,
Not Assigned
0 to 255 mL
Depends on the inner diameter of the
pump tubing. It is derived from the
calibration of pumps.
0 to 999 seconds
Manual, Daily, Weekly, Monthly
Day - Week days
Date - Current month dates (1 to 31)
00:00 hr to 23:59 hr
Celsius, Fahrenheit
1 to 100 mL
Enable, Disable
0 to 60
Disable, Before Reagent1, Reagent2
Terms Definition | 35