Connecting Ethernet Cable; Connecting Power Cable; Figure 5-8 Connecting The Ethernet Cable - Raisecom Gazelle S1503i User Manual

Raisecom
Gazelle S1503i (A) User Manual

5.4.2 Connecting Ethernet cable

Follow following steps to connect the Ethernet cable:
Step 1 Make the Ethernet cable according to specifications.
Step 2 Align the Ethernet cable head with the Ethernet interface of the Gazelle S1503i and insert the
Ethernet cable into the Ethernet interface gently, as shown in Figure 5-8.

Figure 5-8 Connecting the Ethernet cable

5.4.3 Connecting power cable

Connecting DC power cable



The DC power interface of the Gazelle S1503i is a 5-PIN Phoenix terminal. The process to
connect the power cable is as below:
Step 1 Make the DC power cable according to specifications.
Step 2 Insert the DC power cable head into the power interface of the Gazelle S1503i and confirm
full insertion, as shown in Figure 5-9.
Make sure the grounding cable is grounded correctly before connecting the power
cable.
Disconnect all power supplies before connecting or removing the power cable.
Use the power cable which meets the technical specifications.
Raisecom Technology Co., Ltd.
5 Hardware installation
39