Raisecom
Gazelle S1020i-GL (A) User Manual
Figure 4-3 Loosen the screw of the ground terminal
Step 2 Put the OT terminal of the ground cable and washers to the screw in order.
Step 3 Install the screw to the ground terminal again and tighten the screw clockwise, as shown in
Figure 4-4.
Figure 4-4 Connecting the ground cable
4.4 Connecting cables
4.4.1 Connecting Ethernet cable
Connect the Ethernet cable as below:
Step 1 Make the Ethernet cable as required.
Step 2 Align the Ethernet cable header with the Ethernet interface of the Gazelle S1020i-GL and
insert the Ethernet cable into the Ethernet interface gently, as shown in Figure 4-5.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
4 Hardware installation
50