Grounding Device; Figure 5-5 Installing The Wall-Mount Plate To The Wall; Figure 5-6 Untightening The Screw Of The Grounding Terminal - Raisecom Gazelle S1503i User Manual

Raisecom
Gazelle S1503i (A) User Manual

Figure 5-5 Installing the wall-mount plate to the wall

5.3 Grounding device

Connecting the protective grounding cable properly is an important guarantee to
lightning protection, anti-electric shock and anti-interference. The Gazelle S1503i
must be connected to the protective grounding cable correctly during installation,
which helps avoid personal injury and equipment damage.
Follow following steps to connect the protective grounding cable:
Step 1 Anticlockwise untighten the screw of the grounding terminal and properly keep the screw and
shims taken down, as shown in Figure 5-6.

Figure 5-6 Untightening the screw of the grounding terminal

Step 2 Fit the OT terminal of the grounding cable and shims to the screw in order.
Step 3 Install the screw to the grounding terminal again and clockwise tighten the screw, as shown in
Figure 5-7.
Raisecom Technology Co., Ltd.
5 Hardware installation
37