Cables; Fiber; Table 2-16 Type And Usage Of The Fiber - Raisecom Gazelle S1503i User Manual

Raisecom
Gazelle S1503i (A) User Manual
DC power
module 2
AC power
module

2.7 Cables

2.7.1 Fiber

Introduction
The Gazelle S1503i supports the single-mode fiber and multi-mode fiber. These two kinds of
fiber are same in appearance while different in color. The yellow one is single-mode fiber and
the orange one is the multi-mode fiber.
The Gazelle S1503i can be connected to the Optical Distribution Frame (ODF) or optical
interfaces of other devices through fiber.
Table 2-16 lists the type and usage of the fiber.

Table 2-16 Type and usage of the fiber

Usage
 Connect the Gazelle
S1503i to the ODF
through the Ethernet
optical interface.
 Connect the Ethernet
optical interface on the
Gazelle S1503i to optical
interfaces on other
devices.


Item
Rated voltage
Voltage range
Rated voltage
Voltage range
Frequency
Local
connector
LC/PC
LC/PC
LC/PC
Choose the connector type and jumper cable length reasonably based on the on-
site requirements.
The supported connector of the optical interface depends on the optical module.
Raisecom Technology Co., Ltd.
24/48 VDC
20–72 VDC
110/220 VAC
85–264 VAC
50/60 Hz
Remote
connector
LC/PC 2 mm single-mode fiber
2 mm multi-mode fiber
FC/PC 2 mm single-mode fiber
2 mm multi-mode fiber
SC/PC 2 mm single-mode fiber
2 mm multi-mode fiber
2 Hardware structure
Parameter
Type Standard
ITU-T G.652
16