Installing Device On Wall; Figure 5-1 Connecting The Clamping Rail Connector To The Guide Rail; Figure 5-2 Installing The Gazelle S1503I To The Guide Rail - Raisecom Gazelle S1503i User Manual

Raisecom
Gazelle S1503i (A) User Manual

Figure 5-1 Connecting the clamping rail connector to the guide rail

Step 2 Press hard to fix the Gazelle S1503i to the guide rail, as shown in Figure 5-2.

Figure 5-2 Installing the Gazelle S1503i to the guide rail

Step 3 Make sure that the clamping rail connector is connected to the guide rail tightly.

5.2.2 Installing device on wall



Follow following steps to install the Gazelle S1503i to the wall:
Step 1 Anticlockwise unscrew the clamping rail connector and remove it, as shown in Figure 5-3.
You can choose either guide-rail installation or wall-mount installation as needed.
You need to remove the clamping rail connector on the rear panel before the wall-
mount installation.
The Gazelle S1503i is not delivered with the wall-mount plate. You can order it
separately if needed.
Raisecom Technology Co., Ltd.
5 Hardware installation
35