Management And Auxiliary Interfaces; Table 2-1 Interfaces On The Gazelle S1503I; Table 2-2 Management And Auxiliary Interfaces On The Gazelle S1503I - Raisecom Gazelle S1503i User Manual

Raisecom
Gazelle S1503i (A) User Manual

Table 2-1 Interfaces on the Gazelle S1503i

Model
Gazelle S1503i-
GF-2GE-R
Gazelle S1503i-
GF-2GE

2.2.2 Management and auxiliary interfaces

Table 2-2 lists management and auxiliary interfaces on the Gazelle S1503i.

Table 2-2 Management and auxiliary interfaces on the Gazelle S1503i

Power interface
RST button
Print Interface type
RS-232/RS-485 (selected
RS-
through software)
232/RS-
485
1–2 RJ45
3 SFTP
1–2 RJ45
3 SFP
Interface type
Raisecom Technology Co., Ltd.
5-PIN Phoenix terminal (7.62 mm gap) for power input
 Short-press the button for less than 3s to reset the device.
 Long-press the button for more than 3s to recover to factory
settings and reset the device.
2 Hardware structure
Description
3-PIN Phoenix terminal (5.08 mm gap)
serial interface
 In RS-232 mode, the Gazelle
S1503i does not support
hardware-based rate
negotiation.
In RS-485 mode, the Gazelle

S1503i supports 2-wire half
duplex mode only.
 The serial interface can be
multiplexed as a Console interface
through software configuration. For
details, see Gazelle S1503i (A)
Configuration Guide.
10/100/1000BASE-T electrical
interface
Support the following optical modules:
 100BASE-FX
 1000BASE-X
10/100/1000BASE-T electrical
interface
Support the following optical module:
 100BASE-FX
 1000BASE-X
Description
8