Connecting Cables; Connecting Ethernet Cable; Connecting Fiber; Figure 4-4 Connecting The Ground Cable - Raisecom Gazelle S1020i-LI User Manual

Raisecom
Gazelle S1020i-LI (A) User Manual
Step 2 Put the OT terminal of the ground cable and washers to the screw in order.
Step 3 Install the screw to the ground terminal again and tighten the screw clockwise, as shown in
Figure 4-4.

Figure 4-4 Connecting the ground cable

4.4 Connecting cables

4.4.1 Connecting Ethernet cable

Connect the Ethernet cable as below:
Step 1 Make the Ethernet cable as required.
Step 2 Align the Ethernet cable header with the Ethernet interface of the Gazelle S1020i-LI and
insert the Ethernet cable into the Ethernet interface gently, as shown in Figure 4-5.

Figure 4-5 Connecting the Ethernet cable

4.4.2 Connecting fiber

The Gazelle S1020i-LI supports connecting the SFP optical module to the LC/PC fiber
connector.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
4 Hardware installation
39