Figure 5-3 Removing The Clamping Rail Connector; Figure 5-4 Installing The Wall-Mount Plate To The Rear Panel Of The Gazelle S1503I - Raisecom Gazelle S1503i User Manual

Raisecom
Gazelle S1503i (A) User Manual

Figure 5-3 Removing the clamping rail connector

Step 2 Install the wall-mount plate to the rear panel of the Gazelle S1503i and clockwise screw the
wall-mount plate tightly, as shown in Figure 5-4.

Figure 5-4 Installing the wall-mount plate to the rear panel of the Gazelle S1503i

Step 3 Install the wall-mount plate to the wall, as shown in Figure 5-5.
Raisecom Technology Co., Ltd.
5 Hardware installation
36