ARM DSTREAM-HT Getting Started Manual page 30

DSTREAM-HT Getting Started Guide
3. Either accept the auto-selected firmware update file, or browse and select a different firmware
update file:
• To accept the auto-selected firmware update file, click Install.
• To select a different firmware update file, in Select Firmware Update File, click Browse,
select your firmware update file, and click Open. Click Install.
Results
The firmware is now updated on both the DSTREAM-ST unit and HSSTP probe.
Related information
Connect and power up the DSTREAM-HT system
Copyright © 2019, 2022 Arm Limited (or its affiliates). All rights reserved.
on page 24
Non-Confidential
Document ID: 101760_1.0_02_en
Version 1.0
Set up your DSTREAM-HT
Page 30 of 39