B2F50-00 - Sk Not Programmed/Invalid - Mahindra XUV700 2021 Diagnostic Manual

Table of Contents

Advertisement

Diagnostic Manual
XUV700 (Diesel)
13.14 B2F50–00 — SK NOT PROGRAMMED/INVALID
13.14.1 EMS and IMMO ID
EMS ECU and UICU ID's are checked for any mismatch during every ignition cycle
DTC Description
Immobilizer
authentication error
DTC INFORMATION
NORMAL OPERATION
• Ignition ON
• After successful security authentication, vehicle starts
normally
DTC DETECTING CONDITIONS
• This combination is registered when the signal from
EMS ECU is not matching with UICU. UICU IMMO SK
field is blank.
DTC REACTIONS
• Immobilizer check lamp: ON
• Engine check lamp BLINKS
• Starter will not engage
HEALING CONDITION
• Ignition OFF/ON
• Fault not present
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are
70
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
UICU
EMS ECU
B2F50–00
P1832–00
B2F42–00
B2F45–00
OCT - 2021/Rev 1
UICU
DTC Description
SK
Programmed/
INVALID
Wrong TXP
Authentication
failed/time out
PROBABLE CAUSES OF
FAILURE
• UICU is not programmed
MAN-01065
not

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents