Mahindra XUV700 2021 Diagnostic Manual page 91

Diagnostic Manual
XUV700 (Diesel)
CONNEC-
TOR NO
14.1.1.3 DIAGNOSTIC PROCEDURE
STEP 1 – CHECK THE FUSES
PRE CONDITION
• Ignition OFF
TEST PROCEDURE
• Check the condition of fuse F42, F6, F20, F27, F35, F46, F1, F2 & F50
ACCEPTANCE CRITERIA
• Are all the fuses are OK
• GO TO STEP 2
STEP 2 – CHECK THE BATTERY VOLTAGE
PRE CONDITION
• Ignition OFF
• Remove the EMS ECU main relay
• Ignition ON
TEST PROCEDURE
• Check the battery voltage at pin 157 and pin 158 of C 144 (EMS ECU main relay)
ACCEPTANCE CRITERIA
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by
the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
CONNECTOR
DESCRIPTION
ACTION TO BE TAKEN
OK
UICU
PIN NO
18 PERMANENT BATTERY SUPPLY
1 BATTERY SUPPLY 1
3 BATTERY SUPPLY 2
5 BATTERY SUPPLY 3
16
4 BATTERY GROUND 2
6 BATTERY GROUND 3
2 BATTERY GROUND 1
NOT OK
• Replace the blown fuse
MAN-01065
OCT - 2021/Rev 1
FUNCTION
IGNITION
91