Mahindra XUV700 2021 Diagnostic Manual page 69

Diagnostic Manual
XUV700 (Diesel)
DTC INFORMATION
NORMAL OPERATION
• Ignition ON
• After successful security authentication, vehicle starts
normally
DTC DETECTING CONDITIONS
• This combination is registered when the signal from
EMS ECU is not matching with UICU. UICU is blank.
DTC REACTIONS
• Immobilizer check lamp: ON
• Engine check lamp: BLINKS
• Starter will not engage
HEALING CONDITION
• Program UICU
13.13.2 DIAGNOSTIC PROCEDURE
STEP 1 – PERFORM UICU PROGRAMMING
PRE CONDITION
• Turn ON ignition
TEST PROCEDURE
• Connect i-SECURE dealer tool and perform UICU assignment
Always use i-SECURE + V4.0.7 and above for any security components ECU
programming in "XUV 7OO"
ACCEPTANCE CRITERIA
• UICU assignment TPK should get generated
• Share the UICU assignment TPK to TEKliner or
Use automated BS to generate ASC code
• Execute the ASC code, after ignition reset vehicle
should start with available keys
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by
the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
UICU
ACTION TO BE TAKEN
OK
PROBABLE CAUSES OF
FAILURE
• UICU is not programmed
NOT OK
• Contact TEKliner
assistance
MAN-01065
OCT - 2021/Rev 1
for further
69