• Check whether the VIN in EMS ECU and UICU is matching VIN plate
• Check whether the DTC occurred post replacement of new EMS ECU & Flashing
STEP 1 – VIN MISMATCH BETWEEN EMS ECU AND UICU
PRE CONDITION
• Turn ON ignition
TEST PROCEDURE
• Connect i-SMART diagnostic tool and check VIN in EMS ECU and UICU
ACCEPTANCE CRITERIA
• VIN in EMS ECU and UICU must be matching
• Connect i-SMART and try to clear all DTC's
• If the DTC's not getting cleared, Contact TEKliner
for further assistance
• If the DTC's got cleared. Turn OFF ignition, wait for
2 minutes. Turn ON ignition & Check whether the
issue is resolved
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by
the manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of