Mahindra XUV700 2021 Diagnostic Manual page 98

Diagnostic Manual
XUV700 (Diesel)
CONNECTOR
NO
15.1.1.3 DIAGNOSTIC PROCEDURE
STEP 1 – CHECK THE FUSES
PRE CONDITION
• Ignition OFF
TEST PROCEDURE
• Check the condition of fuse F19, F27, F41, F42 & F43
ACCEPTANCE CRITERIA
• Are all the fuses are OK
• GO TO STEP 2
STEP 2 – CHECK THE BATTERY VOLTAGE IN UICU SUPPLY WIRE
PRE CONDITION
• Ignition OFF
• Remove the UICU connector C 116
• Ignition ON
TEST PROCEDURE
• Check the battery voltage at pin number 1 of C 116
ACCEPTANCE CRITERIA
• Is the battery voltage is 12V
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are
98
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
CONNECTOR
DESCRIPTION
ACTION TO BE TAKEN
OK
ACTION TO BE TAKEN
UICU
PIN NO
3
2
4
NOT OK
• Replace the blown fuse
MAN-01065
OCT - 2021/Rev 1
FUNCTION
CAN HI
CAN LOW
GROUND