Table of Contents
Advertisement
Diagnostic Manual
XUV700 (Diesel)
13.6.2 DIAGNOSTIC PROCEDURE
STEP 1 – CHECK WHETHER CORRECT PART LOCK SET IS FITTED
PRE CONDITION
• Turn OFF the ignition
TEST PROCEDURE
• Check the part number of UICU and lockset fitted in the vehicle. Refer EPC parts catalogue
for Kit part number
ACCEPTANCE CRITERIA
• Immobilizer ECU and lockset part number should be correct as per electronic parts
catalogue
• GO TO STEP —2
STEP 2 – CHECK FOR KEY & ANTENNA
PRE CONDITION
• Turn ON the ignition
TEST PROCEDURE
• Check key using i-SECURE latest version.
Always use i-SECURE + V4.0.7 and above for any security components ECU
programming in "XUV 7OO"
ACCEPTANCE CRITERIA
• Key check should pass successfully
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document, are
52
prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will
amount to unauthorized use and shall be liable for penalty/prosecution© 2021 Mahindra & Mahindra Ltd.
UICU
ACTION TO BE TAKEN
OK
Refer Key checking procedure
ACTION TO BE TAKEN
NOT OK
• Replace the immobilizer ECU or the
lock set (Refer electronic parts
catalogue
before
components)
MAN-01065
OCT - 2021/Rev 1
replacing
the
Hide quick links:
Advertisement
Table of Contents
