Fz5-L Series - Omron FZ5 Series Hardware Setup Manual

2 Overview of FH/FZ5 series
2-2-4

FZ5-L Series

* Items indicated with an asterisk are dedicated items, and cannot be substituted.
*
Sensor controller
The Controller performs the image processing specified
by the user settings and outputs the measurement results.
Camera 2ch type
FZ5-L350
FZ5-L355
*
LCD monitor
Use the monitor to check images and
display the condition-setting menus.
FZ-M08 (8.4 inch)
*
Monitor cable
FZ-VM (2 m, 5 m, bending radius: 75 m)
2 - 10
Camera 4ch type
FZ5-L350-10
FZ5-L355-10
*
Camera cable
Camera cable
FZ-VS3 (2 m, 3 m, 5 m, 10 m, min. bending radius: 69 mm)
Bend resistant camera cable
FZ-VSB3 (2 m, 3 m, 5 m, 10 m, min. bending radius: 69 mm)
Right-angle camera cable
FZ-VSL3 (2 m, 3 m, 5 m, 10 m, min. bending radius: 69 mm)
Bend resistant Right-angle camera cable
FZ-VSLB3 (2 m, 3 m, 5 m, 10 m, min. bending radius: 69 mm)
Long-distance camera cable
FZ-VS4 (15 m, min. bending radius: 78 mm)
Long-distance Right-angle camera cable
FZ-VSL4 (15 m, min. bending radius: 78 mm)
*
Camera
Detects workpieces as images.
Standalone camera
FZ-SC/FZ-S/
FZ-SC2M/FZ-S2M/
FZ-SC5M /FZ-S5M /
FZ-SFC/FZ-SF/
FZ-SPC/FZ-SP/
FZ-SHC/FZ-SH
Intelligent Compact Digital Camera
FZ-SQ010F/FZ-SQ050F/
FZ-SQ100F/FZ-SQ100N
*
Camera with Lighting
FLV-TCC1/FLV-TCC4/
FLV-TCC1EP/FLV-TCC3HB
Peripheral Device
* USB flash drive
FZ-MEM2G
FZ-MEM8G
Power Supply
The power supply connected to FZ5 Sensor Controller
differs depending on the number of connected cameras
and types for various consumption current types. Select
accordingly.
Recommended Model by OMRON: S8VS series
Input Device
Mouse, Keyboard
(Commercially available USB devices)
Vision System FZ5 series Hardware Setup Manual (Z423)