Setup Of Camera & Software Vision (Fj-S££££ Series); Prepare Hardware - Omron FJ Series Camera Setup Manual

1-2
Setup of Camera & Software Vision
(FJ-S££££ Series)
1-2-1

Prepare hardware

System cofiguration:
Camera
Camera cable (Power, I/O)
FJ-VSP
First prepare hardware components to construct the system.
• Required: PC
• Required: GigE Camera (in the quantity required)
• Required: Application software (Installation CD and Dongle)
• Required: Gigabit Ethernet adapter (PoE type is recommended)
• Required: Camera cable (LAN)
• As needed: Camera cable (Power, I/O)
• As needed: External power supply unit for cameras (In case PoE is not used)
• As needed: PoE Injector
• As needed: Switching HUB (In case multiple cameras are used)
• As needed: LAN cable
Shown below are the combinations of quantity of cameras, and type of power supply.
Index
1
2
3
4
5
6
FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)
PC
Camera cable (LAN)
FJ-VSG
PLC / Sensor / External power supply, etc.
Quantity of cameras
1 unit
1 unit
1 unit
Multiple units
Multiple units
Multiple units
1 Setup of Camera & Software Vision
Application software
(Installation CD, Dongle)
Ethernet
RS-232C
EtherNet/IP
PoE Gigabit Ethernet adapter
External power source
PoE Injector
External Power supply unit (for each cameras)
PoE Switching HUB
PoE Injector
Power supply
1
1-3