Omron FZ5 Series Hardware Setup Manual page 121

Item Model
High-speed FZ-SH/SHC
digital CCD
Cameras
Intelligent FZ-SQ
Compact Digi-
tal CMOS
Cameras
*1. The FH-S enables switching between standard and high speed modes. In high speed mode, images can be trans-
ferred approximately two times faster than in standard mode, but the connectable cable length will be shorter.
*2. The FH-S has two channels to connect Camera Cables. Connection to two channels makes image transfer two
times faster than connection to one channel: high speed mode using two channels can transfer approximately four times
as many images as standard mode using one channel.
*3. Each channel can be used to connect up to two Cable Extension Units: up to four extension units, two channels × two
units, can be connected by using two channels.
Vision System FZ5 series Hardware Setup Manual (Z423)
Trans-
No. of CH
mis- Maximum cable
used for
sion length using 1
connec-
speed
Camera Cable
*2
tion
*1
15 m (Using
FZ-VS4/VSL4)
--- ---
15 m (Using
FZ-VS4/VSL4)
--- ---
Max. num- Using Cable Extension Units FZ-VSJ
ber of
connect-
Max.
able
cable
*1
Extension
length
Units
2 45 m [Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
2 45 m [Configuration 1]
Camera cable: 15 m × 3
Extension Unit: 2
3 Configuration
Connection configuration
3 - 59
3