Product Overview - Baicells Nova430i Quick Manual

Outdoor 4x250mw enodeb
Hide thumbs Also See for Nova430i:
Table of Contents

Advertisement

1. Product Overview

1.1
Introduction
Baicells Nova430i is an advanced two-carrier outdoor eNodeB based on LTE TDD
technology, which is developed by Baicells. It is capable of operating in Carrier
Aggregation (CA) or Dual Carrier (DC) mode.
In CA mode, contiguous or non-contiguous channels are aggregated to provide up to 40
MHz bandwidth. This essentially doubles the downlink capacity when the CA 430i is
used with all CAT6/7 user equipment.
In DC mode, each carrier is treated as an independent cell, supporting 96+96 users, and
each supporting 5, 10, 15, or 20 MHz bandwidth. Using a Nova430i in DC mode
simplifies and streamlines the deployment of split sectors.
In addition to having the option to operate Nova430i in either CA or DC mode, HaloB (an
embedded MME option) comes as a default feature in the base software. Baicells's
patented HaloB solution migrates the necessary core network functions to the eNB.
1.2
Features
Compact, all-in-one design of internal antenna and integrated GPS
Citizens Broadband Radio Service (CBRS) band covers with dual carrier.
Based on 3GPP international standard TDD LTE technology; provide high speed
data service; support a maximum aggregation peak rate of DL: 220Mbit/s, UL:
14Mbit/s with 2x20MHz spectrum, using CAT 6/7 or higher users.
Support flexible uplink and downlink time slot ratio: 1(2:2), 2(1:3), and high speed
data transmission.
Support 5MHz/10MHz/15MHz/20MHz operation bandwidth.
96 concurrent users per carrier, 96+96 in DC mode.
Support copper (RJ-45) backhaul, flexible to deploy.
PoE++ power supply, only one Ethernet cable required for data transmission and
power supply.
Security services to provide timely protection against potential security risks and
illegal intrusion.
Support simple and convenient local and remote web management.
1

Advertisement

Table of Contents
loading

Table of Contents