Static Routes; Dmz - Baicells EG3015M-M30-HP Configuration Manual

Table of Contents

Advertisement

Field Name
Mode
Encryption
Cipher
Key Renewal
Interval(seconds)
Key

3.2.4 Static Routes

Select Network > Static Routes, and set the Static Routes.
To add a route, click on the ADD button to open a dialogue window where you can input
the target IP address, netmask, interface type (APN, LAN, or WAN), and gateway address.
Figure 3-11 Static Routes

3.2.5 DMZ

In technology, the DMZ refers to a firewall between incoming WAN traffic and the LAN to
which the CPE is connected. Two basic DMZ methods are (a) using a single firewall, also
known as the three-legged model, and (b) using dual firewalls (Figure 3-12). These
architectures can be expanded to create complex architectures depending on the network
requirements.
Description
WIFI working mode: WIFI hotspot, WIFI STA. Default WIFI
hotspot
Encryption mode. Support No Encryption, WPA-PSK, and
WPA2-PSK.
Algorithm mode. Support CCMP (AES), TKIP, TKIP and
CCMP (AES)
Set the lifetime of the key used in secure sessions when
WPA PSK is encrypted
WIFI password

Advertisement

Table of Contents
loading

Table of Contents