Table of Contents
Advertisement
Figure 3-54 SAS Settings
2. Select SAS access mode.
Select Domain Proxy: SAS proxy. Implement SAS access through OMC.
Select Direct SAS: SAS direct connection. CPE is directly connected to SAS
server.
3. In Direct SAS mode, you need to select SAS registration mode.
Select Multi-Step: multi step registration. This registration mode is used when the
installation information of the device already exists on the SAS server.
Select Single-Step: single step registration. This registration mode is used when
there is no installation information of the device on the SAS server.
4. Configure SAS parameters.
Table 3-10 SAS Settings
Field Name
Description
ACS Server URL
Web address of the auto-configuration server (ACS). When the
access method is Direct SAS, it cannot be edited.
User ID
Enter the user name to access the ACS server
Call Sign
Device identifier
5. When Single-Step registration mode is selected, antenna parameters need to be
configured.
Advertisement
Table of Contents
