Table of Contents
Advertisement
Figure 3-4 DHCP settings
The DHCP Reservations may be used to bind an IP address to a specific MAC address
(Figure 3-5). In the bottom half of the pane, enter the IP address and the MAC address,
and click on ADD. The IP address must be within the range of DHCP addresses. Any
configured bindings will appear at the top of the window.
Figure 3-5 Bundled Address List
3.2.2 WAN Settings
3.2.2.1 NAT Mode
The CPE will be worked at NAT mode, and only 1 APN can be configured by Default
Data bear types.
Advertisement
Table of Contents
