Table of Contents
Advertisement
Nova230i Outdoor 2x500 mW eNodeB Installation Guide
3.7.2.2 Upgrade Firmware from the OMC
1. Go to eNB > Upgrade > Upgrade&Rollback.
2. Select the correct Product Type from the list.
3. Select the checkbox next to the eNB(s) you want to upgrade.
4. In the New Task window, select the Upgrade Type.
5. In the eNB section, select the checkbox(es) next to the eNB(s) you want to upgrade.
6. Next to File List, select/deselect Retain Configuration. Under Select, choose the software
version by clicking in the empty cell (a blue checkmark gets displayed).
7. Choose the Execute Type, which determines when the upgrade will occur.
8. Select OK.
3.7.3 Basic Configuration Overview
Figure 3-15 indicates four main steps for basic configuration: network interfaces, management
server address, quick settings pertaining to key LTE parameters, and the carrier setting.
NOTE: The carrier setting configuration does not apply to any of the Single Carrier (SC)
eNBs including the
Figure 3-15: Configuration Flow
Nova230i.
25
Advertisement
Table of Contents
