Baicells EG3015M-M30-HP Configuration Manual page 61

Table 3-9 SAS Info field description
Field Name Description
SN Serial number of the product
FCC ID FCCID of the product
Category Product category (A or B)
Radio Technology Antenna technology
Antenna Height Antenna type
Type
Group Type SAS CPE Device Group Category
Antenna Gain Antenna gain
Cell High The highest frequency of the current LTE access band
Frequency
Cell Low The lowest frequency of the current LTE access band
Frequency
Bandwidth LTE current bandwidth
Granted SAS server authorized power
EIRP(10MHz)
SAS Status SAS current status
Radio Status Current RF status of LTE
3.6.10.1 SAS Settings
1. Select the enabling mode of SAS function.
 Automatic (B48) select On, automatically turn on SAS (when the device is
connected to band48, SAS will be turned on automatically; when the device is
connected to non band48, SAS will be turned off automatically).
Figure 3-53 Automatic SAS
 Automatic (B48) select Off, turn on SAS manually (If enable is selected for SAS,
it means the SAS function is turned on; if not selected, it means the SAS function
is turned off).