Table of Contents
Advertisement
Figure 3-61 Trace Diagnosis Settings
Table 3-13 Trace Diagnosis parameters
Field Name
Description
Type
The protocol type is ICMP or UDP.
Target IP
A target IP address for the CPE to send packets to.
Maximum Hops
The maximum number of hops between network nodes you want the
packets to take. If the traceroute hits that number, the test will end.
Timeout
A timeout period, in seconds. The range is 1-60 seconds.
Results of the traceroute will appear at the bottom of the window, showing the target IP
address, the maximum number of hops that it took from CPE to the destination, the
packet size, and the time between hops.
3.6.13.3
Iperf
Iperf diagnostic debugging is used to test throughput.
Advertisement
Table of Contents
