Baicells EG3015M-M30-HP Configuration Manual page 29

Select one of the following options:

Full Band (default) – All channels in the band. (Figure 3-19)
− The CPE will routinely scan all channels in the band and all EARFCNs,
increasing the time it takes to connect compared to the other modes. The band is
dependent on the CPE model.
Figure 3-19 Full Band

Dedicated EARFCN
− The CPE will scan the dedicated EARFCN or frequency list first when it is
powered on.
− After the frequency locking point is configured, even if the locked frequency point
cell cannot be accessed, CPE will not search and access cells other than the
locked frequency point cell. Up to 10 frequency information can be added.
– Specific EARFCNs or frequencies. (Figure 3-20)