Baicells EG3015M-M30-HP Configuration Manual page 13

Table of Contents

Advertisement

Field Name
IMSI
LTE Mode
IMEI
PLMN
Band
Cell ID
RSRQ
eNB ID
EARFCN
PCI
DL Frequency
UL Frequency
CINR
The unique International Mobile Subscriber Identity (IMSI) number
associated with the SIM card in the subscriber's CPE. The IMSI
must be identifiable by the operator's LTE network in order to access
it.
The LTE network operates with either Time Division Duplexing
(TDD) or Frequency Division Duplexing (FDD)
International Mobile Equipment Identity is like a serial number for the
SIM card
The Public Land Mobile Number (PLMN), or operator network ID, to
which the CPE is connected
The range of frequencies within the band the CPE may use for
wireless communications with an eNB, expressed in MHz
The operator's cell site ID to which the CPE is connected. A cell site
may comprise more than one eNB. Each eNB is given a PCI to
identify it.
Reference Signal Receiving Quality indicates the quality of the
wireless signal
The operator's cell site ID to which the CPE is connected. A cell site
may comprise more than one eNB. Each eNB is given a PCI to
identify it.
The E-UTRA Absolute Radio Frequency Channel Number (band
and frequency) within which the CPE operates
The Physical Cell Identifier (PCI) unique to each eNB. PCI indicates
to which eNB the CPE is connected. An operator can have multiple
eNBs serving the same cell.
The frequency, in MHz, being used in the downlink (eNB to CPE). In
LTE, the carrier frequency in the uplink and downlink is designated
by the EARFCN, which identifies the LTE band and carrier
frequency.
The frequency, in MHz, that the CPE is using in the uplink (CPE to
eNB). In LTE, the carrier frequency in the uplink and downlink is
designated by the EARFCN, which identifies the LTE band and
carrier frequency.
The Channel Signal-to-Interference-plus-Noise Ratio reflects the
signal strength of the signal received from the two antennas in the
eNB, expressed in decibels (dB)
NOTE: Additional SINR values are reported when a transmitting
device is using more than two antennas.
Description

Advertisement

Table of Contents
loading

Table of Contents