Table of Contents
Advertisement
detect a new version of firmware on the dedicated FTP server, if available, and will
automatically upgrade to the new version.
If you are using a dedicated FTP server for this purpose, select the Enable check boxes
next to FTP Auto Upgrade and Check New FW after setup (Figure 3-47). Enter the FTP
server IP address and the Path And File text suffix. If login permissions are required to
access the server, enter the username and password. To configure a set interval for the
CPE to check the server for new firmware, select the check box next to Use custom
Interval and enter the interval time, in hours. The range is 1-2400 hours.
Figure 3-47 FTP Auto Upgrade
3.6.6 TR-069
If your network operates using a TR-069 auto-configuration server (ACS), the ACS will
automatically provide the CPE configuration settings. Once you set up both the ACS and
the CPE, you do not need to enter any other parameters through the CPE GUI. Use the
TR069 sub-menu to enable the TR-069 function for the CPE (Figure 3-48). Refer to
Table 3-7 for a description of each field.
Advertisement
Table of Contents
