About The Interface Panel - MINOLTA-QMS magicolor 3100 Installation Manual

Press Key
The registration page prints again. Confirm that the registration is correct.
Repeat the process for the other colors, if necessary.
Online (twice)
5 "
The printer automatically saves each number as you progress
through the choices using the Next or Previous key. The printer
does not have to be restarted for the changes to take effect.

About the Interface Panel

The interface panel is located on the back of the printer.
USB Port
Ethernet Port
Using a twisted-pair (RJ45) Ethernet cable, connect the Ethernet port on
the printer to a 10BaseT/100BaseTX network connection.
Optional Interface
Optional network interfaces such as Token-Ring are installed here.
Optional SCSI
An optional SCSI daughterboard can be installed here. One SCSI device,
such as a Zip drive, is allowed.
Parallel Port
Using a Centronics IEEE 1284 bidirectional parallel cable, connect the
parallel port on the printer to the parallel port on your computer.
USB Port (Type B)
Using a USB cable, connect the USB port on the printer
to the USB port on your computer.
About the Interface Panel
(Until) Display Reads Message in Capital
Letters
REGISTRATION PG/YES
REGISTRATION/REGISTRATION PG
IDLE (and online button is on).
Optional SCSI Optional Interface
Ethernet Port Parallel Port
25