ThinkIO
™
- P
CoDeSys PLC
PROGRAMMING ASSISTANCE GUIDE
6.6
Setting Up the Gateway Server for Communication
Any time it is necessary to communicate with a ThinkIO-P (e.g to download a project) a gateway
server is required to be operating using preselected communication parameters. When needed,
the gateway server will be started automatically (if not already running) by the CoDeSys IDE.
Before the gateway server can communicate with the ThinkIO-P, however, certain parameters
must be set. This is accomplished as follows.
PROCEDURE START: Setting up the communication parameters
1. Select Online, then click Communication parameters
ID 29867.06, Rev. 01
Page 27
© 2007 Kontron Modular Computers GmbH