Table of Contents
Advertisement
ThinkIO
™
- P
7. Accept the selections as indicated or revise accordingly, then click OK
8. Now select File, then Save and enter an appropriate file name and click OK
PROCEDURE END: A new project has been created, given a name, and the target settings
ID 29867.06, Rev. 01
PROGRAMMING ASSISTANCE GUIDE
have been selected. The screen displayed after step 8 is the starting
screen for the procedure in section 6.2.1.
© 2007 Kontron Modular Computers GmbH
CoDeSys PLC
Page 15
Advertisement
Table of Contents
