Kontron ThinkIO-P Manual page 15

Hide thumbs Also See for ThinkIO-P:

Table of Contents

ThinkIO

™

- P

3. Click the file to be installed and then click Open

The ".tnf" file for the ThinkIO-P is "...\Targets\KONTRON\ThinkIO_P.tnf".

4. At the top of the InstallTarget box the installation directory is displayed. Ensure that the

path indicated is correct for the CoDeSys installation, i.e.

"C:\Programme\3S Software\CoDeSys V2.3\Targets\KONTRON\THINKIO\"

If it is not correct, revise it as required.

5. From the Possible targets list, select the target to be installed, then click Install

6. As required, repeat step 5 for every target to be installed, then click Close to exit the

InstallTarget box

PROCEDURE END: Installation of the targets is now complete

ID 29867.06, Rev. 01

PROGRAMMING ASSISTANCE GUIDE

CoDeSys PLC

Page 11

Table of Contents