Kontron ThinkIO-P Manual page 24

Hide thumbs Also See for ThinkIO-P:

Table of Contents

CoDeSys PLC

7. Assign variables to the addresses of the inputs or outputs of the modules for use within

the application. (e.g. module 750-400 with variable names KBUS_IN1, KBUS_IN2 and

module 750-501 with variable names KBUS_OUT1, KBUS_OUT2)

• to assign a variable to an input or output of a module, first expand the module by click-

ing the plus sign (+) in front of the module designator, click the input/output to highlight

it, then click "AT" at the beginning of the address of the module to open a text insertion

box

• type the variable name in the text insertion box, then press <ENTER> to accept the

name and close the box

• repeat the above until all inputs and outputs have been assigned variable names

Page 20

PROGRAMMING ASSISTANCE GUIDE

ThinkIO

™

- P

ID 29867.06, Rev. 01

Table of Contents