Installing The Codesys Target Support Package (Tsp) - Kontron ThinkIO-P Manual

Hide thumbs Also See for ThinkIO-P:

Table of Contents

ThinkIO

™

- P

Of special interest is the "Targets\KONTRON" folder:

Variations of ThinkIO-P differ depending on the support provided for field busses:

• K-Bus without a field bus (NOFB) in the file "ThinkIO-P_NOFB.trg"

• K-Bus plus PROFIBUS DP Master on EC1 chip (EC1DPM) in the file

"ThinkIO-P_ EC1DPM.trg"

• etc.

When installing from the KONTRON distribution DVD, all required ThinkIO-P targets will be in-

stalled automatically (see files ThinkIO-P_ ... .trg in the directory above).

5.2

Installing the CoDeSys Target Support Package (TSP)

Normally all implemented ThinkIO-P targets are installed automatically when installing

CoDeSys from the Kontron DVD.

If for some reason targets are to be installed afterwards, then first deinstall the old targets using

the InstallTarget tool from 3S and then delete the empty folders.

Before proceeding, it is recommended to read the "CoDeSys_V23_E.pdf" document. The fun-

damentals of the Target Support Package (TSP) are described in detail in this document.

ID 29867.06, Rev. 01

PROGRAMMING ASSISTANCE GUIDE

CoDeSys PLC

Page 9

Table of Contents