Planning The Installation; Addressing Items In The Planning Process - Wine Guardian Through-the-Wall Installation, Operation And Maintenance Manual

Modification to the equipment may cause injury or damage to the equipment
√ √ √ √ √ This equipment is heavy. Place the system on the floor or on a level
and stable surface that can support the full weight of the system.
√ √ √ √ √ Do not modify the equipment, it may cause damage to the equipment
and voids the warranty.
√ √ √ √ √ Never place anything on top of the system.
√ √ √ √ √ Never block or cover any of the openings or outlets of the system.
√ √ √ √ √ Never allow anything to rest on or roll over the power cord.
√ √ √ √ √ Never place the system where the power cord is subject to wear or
abuse.
√ √ √ √ √ Do not use extension cords.
√ √ √ √ √ Never overload wall outlets.
√ √ √ √ √ Do not remove or open any cover unless the system is turned off and
the power cord is unplugged.
√ √ √ √ √ Use only dedicated power outlet boxes of the correct capacity and
configuration for the system model.
Improper installation may result in the equipment malfunctioning and a safety hazard. Read
all of the installation instructions before installing the Wine Guardian system.

Planning the Installation

Required Tools

Addressing Items in the Planning Process

√ Where to locate the system? It can be mounted flush with the racking or flush with
the wall on the wine cellar side.
√ How to mount the system? A mounting kit is supplied.
√ Locate the electrical power outlet close to the system, in cellar or out . Do not use an
extension cord!
√ Factory supplied power cord on condenser side of the system. It is preferred to be on
the condenser side of the system, the cord can be moved to accomodate wine cellar
side if need be.
16
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
WARNING
DANGER
CAUTION
.