Planning The Installation - Wine Guardian WG15 Installation, Operation And Maintenance Manual

Modification to the equipment may cause injury or damage
 This equipment is heavy. Place the unit on the floor or on a level and stable
surface that can support the full weight of the unit.
 Do not modify the equipment, it may cause damage to the equipment and
voids the warranty.
 Never place anything on top of the unit.
 Never block or cover any of the openings or outlets to the unit.
 Never allow anything to rest on or roll over the power cord.
 Never place the unit where the power cord is subject to wear or abuse.
 Do not use extension cords.
 Never overload wall outlets.
 Do not remove or open any cover unless the unit is turned off and the power
cord is plugged in.
 Use only dedicated power outlet boxes of the correct capacity and
configuration for the unit model.
Improper installation may result in the equipment malfunctioning and a safety hazard. Read
all of the installation instructions before installing the Wine Guardian unit

Planning the Installation

Tools required
Drill/Phillips head Level
Urethane caulk


18
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
to the equipment
RISK OF PERSONAL INJURY OR DAMAGE TO EQUIPMENT
Stud finder Tape measure
Hand saw Drywall saw
WARNING
.
DANGER
CAUTION
Square
Heavy duty
s
nap knife
Drywall screws
