Planning The Installation 规划安装; Addressing Items In The Planning Process 解决规划过程中的问题; Performing A Pre-Installation Check 执行安装前检查 - Wine Guardian D200 Installation, Operation And Maintenance Manual

Planning the Installation
Addressing Items in the Planning Process
✓
Where to locate the unit? Should it be built into the wall or mounted remote and
ducted into the cellar?
✓
How to mount the unit?
✓
Decide where to locate the supply and return grilles in the room to achieve the
temperature gradient and circulation preferred.
✓
Locate the electrical power outlet close to the unit, in cellar or out. Do not use
an extension cord!
✓
Does the condenser heat exhaust need to be ducted away?
✓
Where to locate the thermostat?
✓
Where to run the drain line?
✓
Are all the parts here to complete the installation?
✓ 在哪里安装主机？是将系统安装到墙上或主机安装窖外，由通风管道引入酒窖？
✓
如何安装机组？
决定在何处安装供给和返回格栅，以达到温度梯度和理想的循环
✓
将电源插座靠近机组， 窖内，窖外？不要使用延长线！
冷凝器热排气管道必须排出室外？
在哪里安装恒温器？
往哪里运行排水管线？
是否所有的部件在这里完成安装？
Performing a Pre-installation Check 执行安装前检查
✓ Check for the proper installation of the electrical plug configuration.
✓ Check for the properly sized breaker.
✓ Is the cellar built with adequate insulation and vapor barriers?
✓ Are ducts installed above the ceiling or in accessible places properly sized
before being covered?
✓ Is enough space available around the unit for service and repair?
检查了电源插座的配置是否正确安装。
检查合适尺寸的断路器。
是否有足够的绝缘和防潮层？
被覆盖之前，通风管道安装是否高于天花板顶部，或在出入方便的地方进入酒窖
设备周围是否有足够的空间可用来服务和维修设备？
37
规划安装
解决规划过程中的问题