Names Of Each Remote I/O Unit Section - Mitsubishi Electric MELDAS 600 Series Connection Manual

6.2 Names of Each Remote I/O Unit Section

FCUA-DX10□ FCUA-DX11□/FCUA-DX12□ FCUA-DX13□
Front view
(Front)
(Bottom
view)
(Rear)
1 DI-L (machine input signal connector)
2 DS (transfer speed changeover switch)
3 CS (channel No. changeover switch)
4 DO-L (machine output signal connector)
5 RIO1 (serial connection connector #1)
6 RIO2 (serial connection connector #2)
7 DCIN (+24VDC power input connector)
8 DI-R (machine input signal connector)
9 DO-R (machine output signal connector)
10 HANDLE (manual pulse generator signal
input connector)
11 AIO (analog signal input/output connector)
CHAPTER 6 CONNECTION OF REMOTE I/O UNIT
6.2 Names of Each Remote I/O Unit Section
Front view
(Front)
(Bottom view)
(Rear)
Front view
(Front)
(Bottom view)
(Rear)
4
Enlarged drawing of DS and CS
74
FCUA-DX14□
Front view
(Front)
(Bottom
view)
(Rear)
For changeover of transfer speed.
Normally set to left side.
Not used
Selection of channel No.