Table of Contents
Advertisement
1
PART NAMES
Part names of the MR-EM340GF
This chapter describes the part names of the Simple Motion board.
(1)
(4)
(7)
(8)
(9)
(10)
(11)
No. Name
(1)
Connector for PERIPHERAL
(2)
Connector LEDs for
PERIPHERAL
(3)
(4)
Connector for CC-Link IE Field
(5)
Connector LEDs for CC-
Link IE Field
(6)
(7)
Display LEDs (CC-Link IE)
(8)
(9)
(10)
(11)
Connector for external forced stop
(12)
Switch for board ID setting
(13)
Display LEDs (System
status)
(14)
(15)
(16)
Card edge connector for PCI Express 1
1 PART NAMES
14
(2)
(3)
(5)
(6)
Description
Ethernet communication port. Connects to the host personal computer to use EM Configurator.
LINK LED
For details, refer to the following.
Page 16 LED Display Specifications
SPEED LED
CC-Link IE communication port. Connects to servo amplifiers and other CC-Link IE products.
In the following manual, this connector is referred to as "PORT2", "P2", or "Port 2".
Simple Motion Board User's Manual (Network)
L.ER LED
For details, refer to the following.
Page 16 LED Display Specifications
LINK LED
RUN LED
Indicates the communication status of CC-Link IE communication.
For details, refer to the following.
ERR LED
Page 16 LED Display Specifications
D LINK LED
L.ERR LED
Inputs the external forced stop signal. 24 V DC is applied.
For details, refer to the following.
Page 15 External forced stop connector
Switches which set the distinguished IDs when the multiple boards are used simultaneously.
For details, refer to the following.
Page 17 Board ID Setting Switch
PCI Express LED
Indicates the operating status of the board system.
For details, refer to the following.
RUN LED
Page 16 LED Display Specifications
ERR LED
Communicates with the host personal computer using PCI Express.
(12)
(16)
(13)
(14)(15)
Advertisement
Table of Contents
