Introduction; Part Names - Mitsubishi Electric TW-50A Installation And Instruction Manual

2. Introduction

TW-50A is a total management system.
Any connected air conditioning systems can be operated or monitored on the Web browser. TW-50A can also be
used as an expansion controller of TE-200A.
By connecting TE-200A, up to 200 indoor units and other equipment can be controlled.
Hereafter, TE-200A, unless otherwise specified, will be called "TE-200."
Hereafter, TE-50A, unless otherwise specified, will be called "TE-50."
Hereafter, TW-50A, unless otherwise specified, will be called "TW-50."
Note: A PC is required to monitor and operate the air conditioning units.
Note: The required licenses vary, depending on the functions to be used. Consult your dealer.
Note: For how to use the Web browser, refer to the Instruction Book (Integrated Centralized Control Web).
Note: TE-200A/TE-50A/TW-50A and Mitsubishi Electric's AE-200A/AE-50A/EW-50A have the same functions.

2-1. Part names

Push switch ON/OFF
Push switch Reset
Power
ON/OFF
LED
Status
LINK/ACT1
LINK/ACT2
ON/OFF
Push switch
Reset
USB port
*1 The operation status of the other equipment are excluded.
WT09308X01
USB port
(unused)
ON/OFF
Power Status
LINK/ACT2
LINK/ACT1
Item
Lit in green
Unlit
Lit in green
Blink in green
Unlit
Blink in orange
Blink in blue
Blink in pink
Blink in orange
Blink in orange
Service cover
Power ON
Power OFF
One or more air conditioning units are ON.
One or more air conditioning units or other related equipment
are in error.
All air conditioning units are OFF.
Startup error
Software update in progress
Software update failed
Data transmission in progress (LAN1)
BACnet data transmission in progress (LAN2)
®
Used to turn the connected air conditioning units ON and OFF
all at once.
Used to reboot the TW-50. (This will not affect the operation
status of the air conditioning units.)
Unused
6
Description
*1
*1