Table of Contents
Advertisement
Simple Station input (XYZ-key)
The [XYZ] key is a simple and conventional way of setup.
1) Input the station coordinate
2) Set the horizontal angle by [ANG] key
3
※No ST record is stored to the DB in this function.
Therefore, when you try to record data to an open job after using this key,
your SS/CP records follow a comment record (CO, STN is changed
by [XYZ] key) instead of ST.
Input Height of Target, Height of
Instrument, XYZ coordinate of the
Station.
The Horizontal angle input is optional. If
you reset the angle by [ANG] key or you
don't have to change the angle, you can
just press [ENT].
This function can be used without an open job. It is useful when you
need to continue surveying despite the "Data Full" environment, for
example, you can use this [XYZ] + [ANG] setup as an emergency
means on site.
3-29
XYZ
*
／
○
0
＝
ＨＴ： １．３５６
ＨＩ：
１．６４６ ｍ
Ｘ：
３８６４．９９０
Ｙ：
－１８７２．５０７
Ｘ：
３８６４．９９０
Ｙ：
－１８７２．５０７
Ｚ：
４２．１８５
ＨＡ：
ｍ
1
1
Advertisement
Chapters
Table of Contents
