About Jobs - Nikon DTM-350 Instruction Manual

About Jobs

When you record data on the instrument, you must create or open a Job.
Up to 8100 records can be stored to one Job database. You can have a
maximum of eight Jobs at one time. (See p.3-78 for detail)
3
Settings
1) Enter [MENU] and [3:Sett].
2) Check the settings at least [1:Angle], [2:Dist], [3:Coord.], and [5:Unit].
There are some job settings in them. You cannot change any of the job
settings after creating a job.
3) After checking those settings, press [ESC] to return to MENU screen.
4) Press [1:Job], [MENU], and [1:Create].
You can confirm the current job setting via [2:Set] key in "Create JOB?"
screen.
Control Job
1) Create a job in the office and store some coordinate data that may be used
by several field works.
2) Press [MENU] and [1:Job]. Move the cursor onto the job you want to use
as a common file (control job).
3) Press [MENU] again and choose [3:Control].
The system will search the coordinate points in the Control
Job when the input point cannot be found in the current Job.
If the point is found in the Control Job, it will be copied into
the current Job. (See p.3-82)
3-13
Please check the settings first when you use the
instrument for the first time.
Create Job