Xyz - Nikon DTM-350 Instruction Manual

2:XYZ

Specifying the stakeout point position by Coordinates
Press the [2] key on the Stakeout menu
screen to start Stakeout by Coordinates.
Input the point number/name you want to
stake and press [ENT].
You can also specify the points by Code
and/or Radius from the instrument.
When several points can meet the
specified condition, points are shown in
list style. Right/Left arrow keys will be
the page Up/Down keys.
New point input is also available. Type in
a new PT name and its coordinate.
The delta angle and distance to the target
are shown. Rotate the instrument until the
dHA becomes close to 0° 00' 00".
Press the [MSR] or [TRK] key to measure
to the prism.
dHA: Difference in Horizontal angle to the target point
HD: Distance to the target point
When the [HOT] key is pressed on
any of the shooting point displays, it
shows the setting screen.
You can change the HT, T-P or Prism
constant at any time.
ＰＴ：５０＊
ＣＤ：
Ｒ： ５０ ■
＞ＵＰ，５０２
ＵＰ，５０３
ＵＰ，５０４， ＣＥ
ＵＰ，５０５
ＰＴ：６８
Ｘ： ■
Ｙ：
Ｚ：
ｄＨＡ←１４６° １９'２５"
ＨＤ： ２３． ４６８０ｍ
Ｐｒｅｓｓ ＭＳＲｏｒＴＲＫ
ＰＴ：５０２
１ ：ＨＴ ５：Ｑｅｄｉｔ
２：Ｔ－Ｐ ６：Ｑｍｏｄｅ
３：Ｍｅａｓ．
４：Ｌｅｖｅｌ
１
ｍ
3
↓
１
3-52